Original: $20.61
-65%$20.61
$7.21The Story
Geberit Mapress Stainless Steel T-Piece, Reduced (22mm - 108mm)
The Geberit Mapress Stainless Steel T-Piece (Reduced) is a press-fit branch fitting for creating a reduced-bore tee connection in pipework, forming part of the Geberit Mapress press-fit system. A single press of the jaw makes a secure, flame-free connection in seconds, with no soldering, no naked flame and no hot-works permit required. It is manufactured from CrNiMo steel 1.4401 (EN 10088) for strong corrosion resistance.
Every joint is engineered for installation security: a pressing indicator confirms the connection has been made, while the leak-before-pressed feature visibly reveals any fitting that has been left unpressed during testing. The pressing socket is fitted with a transparent protection plug and a black CIIR seal ring to keep the joint clean and ready for pressing.
Key features
- Pressing indicator
- Leaky if unpressed
- Seal ring made of CIIR, black
- Pressing socket with transparent protection plug
Suitable for
- For cold and hot potable water
- For cooling and heating water without antifreeze agent
- For cooling and heating water with antifreeze agent
- For district heating water ≤ 120 °C
- For saturated steam ≤ 120 °C
- For service water and process water
- For treated water
- For rainwater with a pH value ≥ 5.5
- For grey and black water with a pH value ≥ 5.5
- For extinguishing water (wet)
- For extinguishing water (wet/dry, dry)
- For sprinklers (wet)
- For chemicals and technical liquids
- For compressed air (oil purity class 0–3)
- For negative pressure
- For inert gases (e.g. nitrogen)
- For industrial gases (e.g. acetylene, shielding gases)
- For technical building systems, industry and shipbuilding
Available in a size range of 22mm to 108mm.
Description
Geberit Mapress Stainless Steel T-Piece, Reduced (22mm - 108mm)
The Geberit Mapress Stainless Steel T-Piece (Reduced) is a press-fit branch fitting for creating a reduced-bore tee connection in pipework, forming part of the Geberit Mapress press-fit system. A single press of the jaw makes a secure, flame-free connection in seconds, with no soldering, no naked flame and no hot-works permit required. It is manufactured from CrNiMo steel 1.4401 (EN 10088) for strong corrosion resistance.
Every joint is engineered for installation security: a pressing indicator confirms the connection has been made, while the leak-before-pressed feature visibly reveals any fitting that has been left unpressed during testing. The pressing socket is fitted with a transparent protection plug and a black CIIR seal ring to keep the joint clean and ready for pressing.
Key features
- Pressing indicator
- Leaky if unpressed
- Seal ring made of CIIR, black
- Pressing socket with transparent protection plug
Suitable for
- For cold and hot potable water
- For cooling and heating water without antifreeze agent
- For cooling and heating water with antifreeze agent
- For district heating water ≤ 120 °C
- For saturated steam ≤ 120 °C
- For service water and process water
- For treated water
- For rainwater with a pH value ≥ 5.5
- For grey and black water with a pH value ≥ 5.5
- For extinguishing water (wet)
- For extinguishing water (wet/dry, dry)
- For sprinklers (wet)
- For chemicals and technical liquids
- For compressed air (oil purity class 0–3)
- For negative pressure
- For inert gases (e.g. nitrogen)
- For industrial gases (e.g. acetylene, shielding gases)
- For technical building systems, industry and shipbuilding
Available in a size range of 22mm to 108mm.
