Original: $12.39
-65%$12.39
$4.34The Story
Geberit Mapress Stainless Steel Bend 90° (15mm - 108mm)
The Geberit Mapress Stainless Steel Bend is a press-fit bend that forms part of the Geberit Mapress press-fit pipework system, allowing pipe runs to change direction (the bend angle varies by variant). It delivers a fast, flame-free connection in seconds, with no soldering and no need for a hot-works permit, and is manufactured from CrNiMo steel 1.4401 (EN 10088) for strength and corrosion resistance.
Built-in Geberit press-fit security gives you confidence on every joint: the pressing indicator confirms a fitting has been pressed, while the leak-before-pressed design makes any unpressed connection immediately apparent during testing. A CIIR seal ring and a pressing socket fitted with a transparent protection plug help keep the joint clean and reliable.
Key features
- Pressing indicator
- Leaky if unpressed
- Seal ring made of CIIR, black
- Pressing socket with transparent protection plug
Suitable for
- For cold and hot potable water
- For cooling and heating water without antifreeze agent
- For cooling and heating water with antifreeze agent
- For district heating water ≤ 120 °C
- For saturated steam ≤ 120 °C
- For service water and process water
- For treated water
- For rainwater with a pH value ≥ 5.5
- For grey and black water with a pH value ≥ 5.5
- For extinguishing water (wet)
- For extinguishing water (wet/dry, dry)
- For sprinklers (wet)
- For chemicals and technical liquids
- For compressed air (oil purity class 0–3)
- For negative pressure
- For inert gases (e.g. nitrogen)
- For industrial gases (e.g. acetylene, shielding gases)
- For technical building systems, industry and shipbuilding
Available in a size range from 15mm to 108mm.
Description
Geberit Mapress Stainless Steel Bend 90° (15mm - 108mm)
The Geberit Mapress Stainless Steel Bend is a press-fit bend that forms part of the Geberit Mapress press-fit pipework system, allowing pipe runs to change direction (the bend angle varies by variant). It delivers a fast, flame-free connection in seconds, with no soldering and no need for a hot-works permit, and is manufactured from CrNiMo steel 1.4401 (EN 10088) for strength and corrosion resistance.
Built-in Geberit press-fit security gives you confidence on every joint: the pressing indicator confirms a fitting has been pressed, while the leak-before-pressed design makes any unpressed connection immediately apparent during testing. A CIIR seal ring and a pressing socket fitted with a transparent protection plug help keep the joint clean and reliable.
Key features
- Pressing indicator
- Leaky if unpressed
- Seal ring made of CIIR, black
- Pressing socket with transparent protection plug
Suitable for
- For cold and hot potable water
- For cooling and heating water without antifreeze agent
- For cooling and heating water with antifreeze agent
- For district heating water ≤ 120 °C
- For saturated steam ≤ 120 °C
- For service water and process water
- For treated water
- For rainwater with a pH value ≥ 5.5
- For grey and black water with a pH value ≥ 5.5
- For extinguishing water (wet)
- For extinguishing water (wet/dry, dry)
- For sprinklers (wet)
- For chemicals and technical liquids
- For compressed air (oil purity class 0–3)
- For negative pressure
- For inert gases (e.g. nitrogen)
- For industrial gases (e.g. acetylene, shielding gases)
- For technical building systems, industry and shipbuilding
Available in a size range from 15mm to 108mm.
